Drinking Water

The CDC advises: Drinking water comes from a variety of sources including public water systems, private wells, or bottled water. Ensuring safe and healthy drinking water may be as simple as turning on the tap from an EPA-regulated public water system. Other water sources may need a water filter, a check on water fluoridation, or an inspection to ensure a septic tank is not too close to a private well. It is important to know where drinking water comes from, how it’s been treated, and if it's safe to drink.

Camping, Hiking, Travel, Survival
While the water flowing in the streams and rivers of the backcountry may look pure, it can still be contaminated with bacteria, viruses, parasites, and other contaminants.

When planning on camping or hiking, it is important to remember your water needs. There are many approaches you can take to providing yourself and others in your group with safe water for both drinking and sanitation.

Safe Drinking Water
Eating contaminated food and drinking contaminated water can increase the risk of developing certain infectious diseases caused by germs such as Cryptosporidium, Giardia, Shigella, and norovirus, among others.

Emergency Disinfection of Drinking Water
If a community or well water system with clean water is not available, it is important to find safe water or disinfect water for drinking, cooking, and brushing teeth.

U.S. federal agencies and the Red Cross recommend these same four steps to disinfect drinking water in an emergency.

1. Use bottled water that has not been exposed to flood waters if it is available.
2. If you don’t have bottled water, you should boil water to make it safe. Boiling water will kill most types of disease-causing organisms that may be present. If the water is cloudy, filter it through clean cloths or allow it to settle, and draw off the clear water for boiling. Boil the water for one minute, let it cool, and store it in clean containers with covers.
3. If you can’t boil water, you can disinfect it using household bleach. Bleach will kill some, but not all, types of disease-causing organisms that may be in the water (Chlorine and iodine may not be effective in controlling more resistant organisms like Cryptosporidium). If the water is cloudy, filter it through clean cloths or allow it to settle, and draw off the clear water for disinfection. Add 1/8 teaspoon (or 8 drops) of regular, unscented, liquid household bleach for each gallon of water, stir it well, and let it stand for 30 minutes before you use it. Store disinfected water in clean containers with covers.
4. If you have a well that has been flooded, the water should be tested and disinfected after flood waters recede. If you suspect that your well may be contaminated, contact your local or state health department for specific advice.

Guide To Edible Plants